News

A brief list of the specific functions for Digital Wheel Balancer.
The 2 versions of Software, BASIC and FULL allow to satisfy different customer needs.
The BASIC version, which includes all the basic functions necessary for a wheel balancer measurement, is equipped on the B2xx and B32x range.
The FULL version, which adds all the advanced features to the BASIC version , is equipped on the B33x, B43x, B44x range.

	BASIC (default)	FULL (Full option)
Unit of measure mm / inches (user setup)
START-STOP Automatic when closing the Wheel guard (user setup)
Display step 1 or 5 gr (user setup)
Display cut-off 1 to 9 gr (user setup)
STOP-ON-TOP at the end of measuring run, wheel is stopped with point of application of weight placed at 12 o'clock
Autodiagnostic a great number of malfunctions or user mistakes in procedure are detected
Autocalibration sensor calibration can be easily performed by the user
SPLIT Possibility to divide the balance weight and hide behind the spokes in a non-visible position
Statistics
FCC Fast Calibration Check
ALU-S allows to measure and enter the exact position of adhesive weights to be placed on alloy rims
MARS Automatic Minimization of Residual Static Unbalance allows to reduce the static unbalance left, due to rounding when using weights multiple of 5 grams.
Optimization Tire matching Static (tire rotated on the rim) Dynamic (tire rotated/overturned on the rim)
AFC Automatic Flange Calibration allows to use even non-balanced flanges (dirty, worn, etc.)
ASF ALU Special Functions Allows to place adhesive weights at 6 o'clock and other useful functions.
APS * Automatic Positioning System Allows to move wheel automatically to inside/outside position for application of the balancing weight. * APS is available only for model with Laser
FAST Fast balancing mode Allows to measure wheel unbalance in half time (for when you have peak-hours time/periods).
Double operator
AUTOSELECT
included optional